8
CAUTION!
This product must be installed & serviced by a suitably qualified person.
INSTALLATION
CUT OUT DIMENSIONS
•
Any work on electric equipment and systems may only be carried out by a qualified electrician.
•
Before obtaining access to terminals, all supply circuits must be disconnected.
•
Failure to install in accordance with these instructions may result in electrical hazards.
•
WARNING:
Always switch off the electricity supply at the mains during installation and during
maintenance such as before replacing the light globe to avoid the possibility of electric shock.
•
This appliance must be installed in an appropriate built into cabinet or structure.
•
For flush-mounted cabinets, the components (plastic or veneered wood) must be held together
by heat-resistant adhesives (with at least 100°C); unsuitable materials and adhesives can cause
buckling and voiding of glue hold which can compromise structure.
•
The cabinet must permit the free passage of the electrical wiring and must be strong enough to
bear the weight of the appliance and hold it in place securely.
•
The oven must be mounted in a secure manner in the envisaged recess, it can be inserted into a
column cabinet or under the top of a modular cabinet, while still providing adequate ventilation.
•
Front ventilation slots must not be obstructed.
•
Installation position must consider surrounding appliances and their installation requirements.
(*) The cable hole diameter should be
a minimum of 60mm to the fit cables.