Salicru SPS.ADVANCE RT2, Руководство пользователя, Страница: 22 / 31

21
Code On display Meaning
BF
bF
Battery failure, low voltage.
BR
bR
Replace batteries.
EE
EE
Internal EEPROM error.
Tab. 5.
Abbreviations shown on the LCD display.
7.2. COMPOSITION OF THE CONTROL PANEL WITH LCD
DISPLAY.
t
The control panel consists of:
ˆ
Three buttons with the functions described in Tab. 6.
ˆ An LCD display with backlighting.
ON/MUTE
SELECT OFF/ENTER
Fig. 14.
View of the control panel.
Button Description
ON/MUTE
- Starting up the UPS.
Press the button for at least 2 seconds.
- Muting the alarm.
Press the button for at least 3 seconds to mute or unmute
the audible alarm.
It is only possible to mute the battery discharge alarm,
which necessarily means that the device is running and
operating in battery mode. Any other warning or error alarm
cannot be muted.
- Button to navigate upwards.
When this button is pressed in UPS settings mode, it will
move upwards through the menu structure in relation to the
point where it is located, accessing the previous variable
with each press.
- Activating the battery test.
Press this button for 3 seconds while in normal or frequency
converter (CF) mode. At the end of the test, it returns to the
respective mode.
SELECT
- Changing the LCD screen display.
Press this button to change the message on the display
to read input voltage, input frequency, battery voltage,
battery level, ambient temperature, output voltage, output
frequency, load consumption and percentage of load
consumption.
- Settings or configuration mode.
Press this button for at least 3 seconds to access this mode
when the inverter of the UPS is shut down.
- Button to navigate downwards.
When this button is pressed in UPS settings mode, it will
move downwards through the menu structure in relation
to the point where it is located, accessing the following
variable with each press.
OFF/ENTER
- UPS shutdown.
Press this button for at least 2 seconds.
- Confirmation of selection.
Press this button to confirm selection in the device’s settings
mode.
Tab. 6.
Functionality of the control panel buttons.
7.3. AUDIBLE ALARMS.
Description Alarm modulation or tone
Possibility of
muting
State of the UPS
Battery mode Beep every 10 s Yes
Warning
Polarity error Beep every 2 s
Yes Low battery Beep every 2 s
Overload Beep every 1 s
Faults
All Continuous. No
Tab. 7.
Audible alarms.
7.3.1. Location of the adjustment parameters on the display.
Parameter 1
Parameter 2
Parameter 3
Fig. 15.
Arrangement of the parameters on the LCD display.
SPS.ADVANCE RT2 UNINTERRUPTIBLE POWER SUPPLY (UPS) USER'S MANUAL
YOUR CONNECTION TO SAFETY
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• info@thiele-kg.de
• www
.thiele-kg.de
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• info@thiele-kg.de
• www
.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK