Salda Smarty 2R VE, Руководство пользователя

Страница: 10 / 50

10
Smarty 2R VE
www.salda.lt
40
mm
90
90
c a b d
10
mm
10
mm
Mounting on the wall.
a) To reduce the vibration stick the insulating tape on the unit‘s cas-
ing side which touches the wall before mounting the unit on the wall.
b) The unit has to be mounted on the mounting brackets.
c) AHU mounting drawing.
d) After the unit is mounted two wall bracket tabs has to be folded to
90
o
angle by pliers to avoid the accident fall of the unit.
• Installation works must be performed only by trained and qualified personnel.
• If you have any questions regarding the save installation and use of the product, please contact the manufacturer or the representative.
• Before installing the unit, unscrew the lid a covering the opening for connection of the kitchen hood and remove the middle part of the insulating ring..
• Cut the connecting opening as indicated on the insulation material.
• Carefully remove the lid, which covers the electric connection for the connection of the electrical part of the kitchen hood to the ventilation unit.
• Mount the hood to the ventilation unit. Fasten with self-tapping screws to the designated connection points.
• It is necessary to ensure the tight and reliable connection of the air ducts of the kitchen hood to the ventilation unit and the electrical contact of the
control circuit.
• The subsequent installation of the device is performed according the description in chapter “Mechanic installation”.
• Properties, assembly, control, use and maintenance of the kitchen hood are described in its instalation manual.
Use cooker hood supplied by our company only. Equipment is not tested
with other cooker hoods and company holds no responsibility for malfunc-
tion or failures of the equipment in this case.