Salda Smarty 2R VE, Руководство пользователя

Страница: 11 / 50

11
Smarty 2R VE
www.salda.lt
•Supply voltage to the unit must be connected by a qualified specialist following the manufacturer’s instructions and effective safety instructions.
•The unit’s power network voltage must correspond to electrotechnical parameters of the unit indicated in the technical decal (~230V; 50 Hz).
• The unit’s voltage, power and other technical parameters are provided in the unit’s technical decal (on the unit casing). The unit must be connected
to the voltage plug socket of the grounded power network in compliance with the effective requirements.
• The unit must be earthed according to the rules on installing electrical equipment.
• The start-up and operation of the unearthed ventilation unit is prohibited.
• It is prohibited to use extension wires (cables) and power network plug socket distribution devices.
• Prior to carrying out any ventilation unit installation and connection activities (until its hand-over to the customer), the unit must be disconnected from
the power network.
• Prior to carrying out any ventilation unit maintenance activities, the unit must be disconnected from the power network.
• After installation of the ventilation unit, the power network plug socket must be accessible at any time and disconnection from the power network is
performed through the two-pole circuit breaker (by disconnecting phase pole and neutral).
• The unit must be thoroughly checked against damages (execution, control, measurement nodes) during transportation before it is connected to the
power network.
• The power cable can be replaced only by a qualified specialist upon the evaluation of the rated power and current.
The manufacturer does not assume any liability for personal injuries and property damage due to non-conformance with the
provided instructions.
1
2
3
4