Salamander Pumps HomeBoost, Руководство по установке, Страница: 9 / 16

8
General
specifications
Applications
The HomeBoost ™ pump is designed to boost
low mains water pressure into a domestic
house to improve low water flow from the
mains supply at peak demand times. It can be
used in two distinct applications:
1. Boosting the incoming mains water supply
to a whole house
2. Boosting the inlet mains water supply
solely to a combination (combi) boiler.
HomeBoost
™
will increase the low incoming
water flow up to 12 l/min which complies with
the Water Supply (Water Fittings) Regulations
1999. As the incoming flow varies, the
HomeBoost
™ will adapt to maintain 12 l/min,
and will move into idle if sufficient flow is
received from the water main.
Power supply
230 volts, 50Hz, 1.8A, continuously rated.
Pump noise
With the technical advances achieved in
the HomeBoost
™
pump, Salamander has
taken another step forward in supplying all
our customers with even quieter centrifugal
pumps. However, no pump is completely
silent and this type of pump is characterised
by a high pitched hum or whine.
Mechanical seals
Scale deposits in water supplies can cause the
mechanical seal to stick if left for long periods
without use. We recommend that the pump
be run for at least five minutes every four
weeks to ‘exercise’ all the working parts.
Connections
¾” BSP male.
Fittings
1 off isolating ball valve with ¾” female tap
connector x 22mm compression
1 off ¾” female tap connector x 22mm
compression
2 off 22mm x 15mm compression reducer sets
Initiation
Fully automatic, water flow operated, requiring
3 litres per minute flow rate to initiate.
Temperature
Maximum fluid temperature is UK cold water
mains temperature (max 20°C).
Standards and approvals
• WRAS approved product
• Complies with the Water Supply
(Water Fittings) Regulations 1999
• Splash proof rating IPX4
• Complies with European Community
Directives (CE)
• Tested for sound power level in
accordance with methods set out in
BS EN ISO 3744:2010 and BS EN ISO
20361:2009, and results calculated to
BS EN ISO 11203: 2009
• EN 55014-1:2006 Electromechanical
compatibility (EMC) – Requirements
household appliances, electrical goods and
similar apparatus (Part 1)
• EN 60335-1:2002 and EN 60335-2-41:2003
Household and similar electrical appliances –
safety (Part 1 General requirements and Part
2-41 Particular requirements for pumps).
The company operates a policy of continuous
development and reserves the right to change
any of the specifications of its products
without prior notice. All information data
and illustrations given in this leaflet may be
subject to variation.
Safety in operation
These appliances are not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
x142741_SP_p2_lh.indd 9 16/12/2014 15:11