Salamander Pumps HomeBoost, Руководство по установке, Страница: 2 / 16

Pump installation and warranty guide
for HomeBoost
™
Important – read this first!
The HomeBoost ™ has two separate and distinct applications. The first is
for use on the incoming domestic cold water mains supply, and the second is
directly on the combi-boiler cold water inlet.
HomeBoost ™
is designed to boost your existing incoming mains water supply
up to 12 litres per min (lpm). The intelligent control ensures that it reacts and
responds to give a stable outflow, and is unrestrictive if your natural water flow
reaches 12lpm or more naturally.
Correct installation is essential for safe operation and a trouble
free system. It is therefore important to read these instructions
thoroughly and ensure that you comply with them. Incorrect
fitting will invalidate the warranty.
If your installation is complicated or you have any questions, please consult the
PumpWise Technical Helpline immediately (0191 516 2002).
Additional help can also be found on the HomeBoost
TM
website
www.home-boost.co.uk
We encourage installers to consult the Salamander helpline before installation,
where our engineers can give you professional advice regarding installation.
When the job is finished, please hand the included warranty card to the
householder to be completed and returned. This page is pre-paid and explains
the warranty provisions.
Don’t forget that if you have called our helpline, you should also complete the
comments section of the card to say how you rate the service you received.
Please leave this installation guide with the customer for reference to
maintenance and safety information.
Thank you for choosing
Salamander Pumps
!
1
x142741_SP_p2_lh.indd 2 16/12/2014 15:11