Salamander Pumps AccuBoost Series Скачать руководство пользователя страница 27

25

3  The Warranty periods

 

 

The Warranty periods referred to in paragraph 1 above are as follows:

 

a.  i.  AccuBoost Pumped products manufactured by the Company 3 years from date  

    of purchase provided the warranty registration is completed online or over the  

    phone within 15 days of purchase. 

 

  ii.  AccuBoost Unpumped products manufactured by the Company 3 years from date  

    of purchase provided the warranty registration is completed online or over the  

    phone within 15 days of purchase.  

 

b.   Products supplied by the company, but are not of the company’s manufacture come 

with 30 day warranty from date of purchase. Anti-Vibration Couplers (hoses) come 

with 1 year from date of purchase.

 

c.   The warranty period in respect of any product repaired or replaced under the warranty 

shall be part of the above period(s) which remain unexpired.

 

d.   In the event of a claim for repairs or replacement being made under the terms of this 

Warranty, a visit from a Salamander service engineer may be necessary. Engineer 

visits are not covered under/part of the warranty agreement. In circumstances where 

in the opinion of the Company the defect has not been caused by the Company’s 

materials or workmanship then the Company reserves the right to charge the claimant 

at its current hourly rates and list prices in respect of any service engineer’s time 

and replacement of any parts. Please speak to our PumpWise for further details and 

confirmation of costs. Be advised in order for the equipment to be assessed by an 

onsite engineer the equipment must remain insitu.

 

e.   This Warranty is given in addition to and does not affect your statutory rights as a 

consumer.

 

f.    This Warranty is valid and enforceable for equipment purchased and used exclusively  

in the UK and The Republic of Ireland only.

 

g.   Where the Company issues a replacement the equipment replaced shall be returned  

to the Company forthwith and shall become the property of the Company.

 

h.   No authority has been given to any person, firm or company to vary the terms of this 

Warranty.

Содержание AccuBoost Series





























Отзывы: