37
CLEANING
Before cleaning turn off the equipment, and disconnect the charging cable. Use a soft, dry cloth. Do not
use aggressive cleaning agents and liquids.
MAINTENANCE
Periodically check the integrity of the connecting cable and casing. If you notice any abnormality, de-
energize the equipment immediately and contact a specialist.
TROUBLESHOOTING
If you notice any fault, turn off the equipment, and remove the cable from the mains socket. Later try
to turn it on again. If the problem persists, check the following list. It may help you fix the problem if
otherwise the equipment is properly connected. Contact a specialist of needed.
Reset
If the radio gives improper reactions or its operation is frozen, turn it off as follows:
- Keep pressed the OK button and the ON/OFF button until the display becomes dark.
Then turn it on again as usual.
General
The equipment does not function, the display is not lit.
•
It is not turned on.
- Check the ON/OFF switch.
•
The connecting cable connection is not correct.
- Connect the (optional) charger to the mains, and the cable to the equipment correctly.
The equipment apparently works but it does not give a sound.
•
The setting of volume control is not correct.
- Make sure that volume control is not set to the minimum value.
•
The connection of audio cables is not correct.
- Check if the connection of the audio cable is correct, and if it is connected according to the standard.
Internet radio
The radio stations are silent.
•
The Internet connection has not been established or it is intermittent.
- Check if the WiFi password is correct.
- The Internet bandwidth is insufficient, particularly if other devices are connected to it as well.
- In the menu select 5s buffer storage setting instead of 2s.
- Change encryption, the radio supports the following: WEP, WPA, WPA2
- Test network availability with the use of the mobile phone.
- Check the DHCP and IP settings of your peripheral devices (modem, router, gateway, …).
- The searched station may not broadcast in 24 hours presently, this may be possible in another
period.
- If too many users try to connect at the same time, the provider’s servers may be overloaded.
- If the number of listeners reaches the maximum allowed number, new persons cannot connect at
the same time any longer.
- The access link to the radio station may have changed. Check it and enter the new link.
- Ask a specialist for help.
If you wish to use the media server function but the radio does not find a compatible device.
- Make sure that the radio and the media device connect to the same network.
- Check the settings of the media device, whether the sharing of the files you wish to have access to
is enabled, and their compatibility with the files that can be played by this radio.