27
When you first turn on the equipment or reset factory state (
FACTORY RESET
), the “WiFi connection
wizard” usually gives the following message on the display:
CONFIGURE NETWORK
? (Would you like
to configure the network?)
If you do not see the above message, you can find the WiFi connection option here in the menu:
button;
MAIN MENU / CONFIGURATION / NETWORK / ADD-REMOVE AP / ADD AP-SCAN
Now the list of available WiFi networks appears; select the one you wish to connect to, then provide
your network password.
•
In order to provide the password of the WiFi network, select the desired characters one by one in
the ABC that appears, by stepping forward and backward. Press
buttons or keep them pressed
to step the letters then press
OK
button to select the currently highlighted letter. Press
OK
button
shortly
.
• If you make a mistake, use
button to clear the last character.
•
Make sure you use small and capital letters of the password properly.
•
After you have provided the complete password correctly, please, keep
the
OK
button
pressed for a
long time
. The equipment will immediately connect to the Internet.
•
If needed, restart setting starting from the main menu. This setting needs to be done only once.
•
During the process of connection, the radio should be in the same room and within 2 metres from
the WiFi router.
•
This equipment does not support 5G WiFi networks, connect to 2.4G network, DLNA and UPnP
router.
•
Supported encryption procedures: WEP, WPA, WPA2
•
Additional useful information on the connection conditions is included in the chapter on Media
Center.
If your WiFi router has a WPS function (WPS button), you can connect more quickly and in a simpler
manner. In this case, instead of
ADD AP SCAN
(search WiFi network), activate
ADD AP WPS BUTTON
function below it in the menu then press the WPS button of the router. Encrypted connection will be
automatically established without providing the password as well.
If you have connected the radio to the Internet, the current reception intensity can be seen in the upper
left corner of
the display. It is recommended to place the radio in
a way that allows as many sticks as possible (max.4)
to be seen for a stable internet connection.
SMART WIFI CONFIGURATION – ONLY FOR ADVANCED USERS
If you do not wish to establish wireless connection to the WiFi network as usual from the menu of the
radio, you can also do this with the use of the EspTouch application, which should be installed on your
iOS/Android phone before. Find this application in the store.
- connect your mobile to the WiFi network to which your radio will be connected as well
- the radio should be within 2 metres from the router
- select the SMART CONFIG menu point of the radio (see above)
- start the EspTouch application on your phone
- after the name of the WiFi network has appeared, give the relevant password
- touch the MULTICAST then CONFIRM buttons
- now the radio is connected to the network
SELECTION OF THE LANGUAGE OF MENU
Follow the menu points below to reach the languages: