Page 11
2.9 Operational Data Setting
Press and hold “ENTER” button for 5 seconds, this will enable operational data
setting, [PSW] and [UNIT] display will show “----”, use
㧎
▲
㧎
and
㧎
▼
㧎
buttons to
select number 1 to 9, as to enter the 4 digits password (password: 1688), then
press “ENTER” button. The unit module number display area will show the 9 sub
menu as listed in the following table, while the temperature display area will show
the correspondent sub menu’s operational data. To change the operational value
of each sub menu, follow these instructions:
(a)
Press “SET” button to select different sub menu (1 to 9).
(b)
Press
㧎
▲
㧎
and
㧎
▼
㧎
buttons to change the operational value setting.
(c)
Press “ENTER” button to save the operational value and exit setting, or press
“CLEAR” button to cancel and exit setting.
Sub
menu#
Operational Data
Unit
Acceptable Operational
Range and Default Value
1
Chilled Water Temperature
Setting
Ԩ
Chilled Water Setting:
Supply – 5 to 30
Return – 7 to 30
2
N/A
N/A
N/A
3
Compressor Minimum Running
Time
Minutes 1 to 10
4
Compressor Minimum Idle Time Minutes 1 to 10
5
Compressor Load Time Interval
Minutes 2 to 10
6
Compressor Unload Time
Interval
Minutes 1 to 5
7
N/A
N/A
N/A
8
N/A
N/A
N/A
9
N/A
N/A
N/A
10
Temperature Differential Setting
Ԩ
1-5
Ԩ
, default: 2
Ԩ
Содержание FCA 201
