7
6
Power On/Off
Button
Power on
Before turning on the power switch, the main battery switch
must be closed. Touch the power switch, and all the indicators
will self-check and light. (if the gird power or PV has been
connected in advance, the power will automatically turn on).
Reset
In emergency case, the system can not work normally, can press
the power button for more than 10 seconds, the system will
enter to the reset status, all the indicators will self-check and
light up again.
Reset to factory setting
If the settings are out of order in APP and need reset to factory
settings, you can press the button for 8 times continuously, the
system will enter the factory restoration mode and restore the
system default parameters.
Power On/Off
Press the button for 10S
，
the indicator will flash and the system
will be power off. When power off the system, should meet the
following 3 conditions, otherwise can not be powered off:
Condition 1: No Solar
Condition 2: No Grid power
Condition 3: The work mode switch is in standby mode.
7
On grid indicator
1.When it is on grid mode and feeds power to grid, the indicator keeps light.
2.When it is on grid mode and in standby status
，
it flashes every 3 seconds.
3.When it is on grid mode and AC keeps charging,it flashes every 0.5 second.
8
Off grid indicator
The system works in off-grid mode, and the battery is discharging with load.
9
Solar charge
indicator
1.In fast charge, it flashes every 0.5 second.
2.It will keep light in float charge.
3.It will not light when no solar charge.
10
Error code
indicator
It will be lighted in low battery voltage, over temperature, overload protection or other
damage.
11
WIFI
WIFI Antenna installation port
12.13
AC output Port
The 2 sockets have power only in off grid mode
14
SOC
1.Light in red color 0-25%
2.Light in blue color 26-50%
3.Light in green color 51-75%
4.Light in white color 76-100%
8. WiFi Setting
No.
Item
Setting format for
reference
Explanation
1
PCS Switch
1
：
Turn on(Default)
2
：
Standby
When the system is in on-grid or off-grid work model,if
select as “Standby”state, the system will be in standby
state and need reset the work model as “Turn On” state
before the system re-start work
2
1
ST
Start charging
Time
00
：
00
Setting between 0-23 hour and 0-59 minute. For example,
set as 07:30, it means that the 1
st
charge period will start
at 7:30
