10
discharge,change the discharge period to 00:00 directly,
then 2
nd
discharge period will not work).
16
Discharge current of
2
nd
discharge period.
30%
Set between 20%-100%;for example,set as 30% it means
the system will stop discharge battery power to the grid
(feed to grid) once the battery SOC reaches to 30% in the
2
nd
discharge period. The SOC will be compared with the
discharge time, whichever arrives first and it stops first. For
example:
SOC is set as 30%, while the discharging(feeding to grid)
time is set as 10 minutes. When battery SOC discharges to
50%, but the discharge time already reach to 10 minutes,it
will stop discharging(feeding to grid) also.
Another example:
SOC is set as 30% and the discharging time is set as 10
hours. If the battery is discharged to 30% less than 10
hours,the system will also stop discharging to grid before
reach the set time.
(This discharging/feeding to grid has nothing to do with
solar power.For solar charger,it will be automatically
charged as long as there is solar power).
17
Discharge current of
2
nd
discharge period
20.0
Set between 1-20A. For example
：
20.0 means the charge
current of 2
nd
discharging period to grid is 20A. (This
discharging here refers to battery power feeds to grid.For
example,if it set as 20A, the battery power feeds to grid is:
26V*20A=520).
18
Year/Month/Day/Hou
r/ Minute/Second
2022-12-14
20:34:51
Set based on the current time according to the format
strictly
19
Function Switch
1:Smart Mode
(Default)
2:Timing Mode
1. Intelligent grid-tied mode, this mode is recommended
first to ensure that the battery is fully charged;
Smart grid-tied mode (default setting): Four conditions
need to be met to enter the smart grid-tied mode, and the
grid-tied power is adjusted in real time according to the
solar power generation.
1) Battery SOC is more than 90%
2) With solar charging
3) The grid power is normal and the voltage is within the
input range
4) The mode switch is selected in grid-tied mode
2. Timed grid-tied mode: work according to the set start
time, duration, SOC, and current
When you set the parameters in the APP and find that the settings are messed up, you need to restore the factory
settings, you can press the ON/OFF button for 8 times, the system will restore the factory settings, and return to
the default set
