STANDBY MODE
This mode will place both the probe head and receiver (if the fiber cables are connected
between them) in a low power mode for extended battery duration. It is recommended to use
this feature every time the probe is not in use, even for shorts periods of time. Since the probe
head can be set into low power mode remotely from the receiver, potentially dangerous
situations where the measured system is floating at high voltage, are avoided.
To enter standby mode, press the TURN ON button shortly in either unit. The ON green led
will start blinking. If the fiber cables are connected, the other unit will also enter low power
mode.
To return to normal mode press the TURN ON button shortly in either unit. If both units are
connected by the fiber cables, both units will resume normal operation automatically. After
normal operation is resumed the ON led will light continuously.
FIBER OPTIC CONNECTIONS
The probe head unit and the receiver are connected with 2 fiber optic cables supplied in a
bundle. Both cables are differentiated by colored strip markers, yellow and red. Each
connector uses a bayonet type connector that requires a small twist for it to be properly fixed
in the unit.
BR-HVCP-1119-rev2
Specifications subject to change without notice
WHEN NOT IN USE ALWAYS
PROTECT THE OPTICAL CONNECTORS FROM DUST
WITH THE SUPPLIED PROTECTIVE COVERS
