- 5 -
6. Click
“
Finish
” to let the “Kids Cam Sticker Factory” installer finish the installation program.
7.
This will automatically launch the Install shield for the camera driver. Click “
Next
” to continue.
8.
Once the camera driver has finished installing you will have to restart your computer.
9.
Congratulations!! You have successfully installed the “Kids Cam Sticker Factory” software, the “PhoTags WebCam Express” and the Camera driver.
Downloading Photos and Videos
Use the “Kids Cam Sticker Factory” program to import photos and vidoes from your camera.
1.
Plug one end of the USB cable into the USB slot on your camera.
2.
Plug the other end of the USB cable into a USB port on your computer.
3.
Your camera will automatically be turned on.
4.
Be sure to wait until the camera is recognized by your computer.
Important: For WinXP users - Do not open the software until you see the “Your new hardware is installed and ready to use” pop-up box on the toolbar.
If you do not see this message after you have plugged in your camera please wait until it appears, otherwise the camera will not function properly.
