Sakai R2-4, Руководство по ремонту

Страница: 219 / 234

10-059
TROUBLESHOOTING
2-6-16. Flood lamp indicator lamp does not light
Check that flood lamp lights.
Reference Fig.: 2-6-3
Check point Check/Cause Action
1. Harness Measure resistance between flood lamp relay terminal 5
wire RG and combination meter connector terminal wire
No.38 wire RG.
Standard resistance : 10 Ω or less
If resistance is abnormal, harness is faulty.
•
•
Repair or replace
harness.
2. Combination Meter
(Flood lamp indicator
lamp)
(1) when starter switch is ON, measure voltage between
combination meter terminal wires and ground terminal
wire.
Battery (12 V) terminal wire No.73 inlet wire L and
ground terminal wire No.2 wire B
Starter switch (ACC) terminal wire No.65 inlet wire Y
and ground terminal wire No.2 wire B
Standard voltage : 12 V or more
(2) when starter switch is ON and flood lamp switch is ON,
measure voltage between combination meter flood lamp
terminal wire No.38 inlet wire RG and chassis ground.
Standard voltage : 12 V or more
If above items (1) and (2) are OK and flood lamp indicator
lamp does not light, combination meter is faulty.
•
•
•
Replace combination
meter.
2-6-17. Side marker lamp indicator lamp does not light
Check that side marker lamp, tail lamp and license lamp light.
Reference Fig.: 2-6-3
Check point Check/Cause Action
1. Harness Measure resistance between lighting switch terminal 3
wire RL and combination meter connector terminal wire
No.45 wire RL.
Standard resistance : 10 Ω or less
If resistance is abnormal, harness is faulty.
•
•
Repair or replace
harness.
2. Combination Meter
(Side marker lamp
indicator lamp)
(1) when starter switch is ON, measure voltage between
combination meter terminal wires and ground terminal
wire.
Battery (12 V) terminal wire No.73 inlet wire L and
ground terminal wire No.2 wire B
Starter switch (ACC) terminal wire No.65 inlet wire Y
and ground terminal wire No.2 wire B
Standard voltage : 12 V or more
(2) when starter switch is ON and lighting switch is
“
”, measure voltage between combination meter
side marker lamp terminal wire No.45 inlet wire RL and
chassis ground.
Standard voltage : 12 V or more
If above items (1) and (2) are OK and side marker lamp
indicator lamp does not light, combination meter is faulty.
•
•
•
Replace combination
meter.
•
•