Sakai R2-4, Руководство по ремонту

Страница: 50 / 234

3-006
ENGINE AND CONTROLS
3-1-1. Installation of pump
When the pump assembly has been removed from the
engine for repair or replacement, reinstall it in accordance
with the following procedure.
①
Apply adequate amount of lithium-based grease to pump
(6) and hub (3) splines.
②
Attach hub (3) to pump (6) aligning it with end surface of
pump shaft.
③
Secure hub (3) with bolt (8).
N•m
(8) Bolt M12×35 : 86 N·m (63 lbf·ft)
④
Secure flange (2) to engine flywheel with eight bolts
(1) and spring washers and washers.
N•m
(1) Bolt M10×30 P=1.25 : 49 N·m (36 lbf·ft)
⑤
Secure housing (4) to engine flywheel housing with twelve
bolts (7).
N•m
(7) Bolt M10×25 P=1.25 : 69 N·m (51 lbf·ft)
⑥
Engage hub (3) with flange (2).
⑦
Secure pump (6) to housing (4) with four bolts (5) and
washers.
N•m
(5) Bolt M14×40 : 167 N·m (123 lbf·ft)
(NOTICE)
Bolt (1) is treated with thread-locking fluid. Use new
thread-locking fluid treated bolt for installation.
•
•
5 6
4
7
8
3
2
1
SECTION B-B
R2-4-03001
B
B
B
5 6
4
7
8
3
2
1
SECTION B-B
R2-4-03001
B
B
B