Suntrio Plus Series
- 6 -
Chapter 2 Preparation
2.1 Safety Instructions
DANGER
· Dangerous due to electrical shock and high voltage.
· Do not touch the operating component of the inverter, or it might result in burning
or death.
· To prevent risk of electric shock during installation and maintenance, please make
sure that all AC and DC terminals are plugged out.
· Do not touch the surface of the inverter while the housing is wet, or it might lead to
electrical shock.
· Do not stay close to the inverter while there are severe weather conditions
including storm, lighting, etc.
· Before opening the housing, the SAJ inverter must be disconnected from the grid
and PV generator; you must wait for at least five minutes to let the energy storage
capacitors fully discharged after disconnecting from power source.
WARNING
·The installation,service, recycling and disposal of the inverters must be performed
by qualified personnel only in compliance with national and local standards and
regulations.
·Any unauthorized actions including modification of product functionality of any form
may cause lethal hazard to the operator, third parties, the units or their property.
SAJ is not responsible for the loss and these warranty claims.
·The SAJ inverter must only be operated with PV generator. Do not connect any
other source of energy to the SAJ inverter.
·Be sure that the PV generator and inverter are well grounded in order to protect
safety of people’s life and property.
CAUTION
·The PV inverter will become hot during operation. Please do not touch the heat
sink or peripheral surface during or shortly after operation.
