Suntrio Plus Series
- 16 -
4.4 Mounting Procedure
4.4.1 Mark the Positions of the Drill Holes of the Rear Panel
The position of the drill holes can be determined by using rear panel. See
Figure 4.3 below:
Figure 4.3 Dimensions of rear panel
4.4.2 Drill Holes and Place the Expansion Tubes
Follow the given guides, drill 3 holes in the wall (in conformity with position
marked in Figure 4.4), and then place expansion tubes in the holes using a
rubber mallet.
Figure 4.4 Drill holes
