SAJ AS1-3KS-5.1, Руководство пользователя

Страница: 43 / 82

- 42 -
DIP switch configuration can be found below:
Table
4.2 DIP switch configuration
Step 4: Please reconnect Battery Switch cable into
（
PCBA-CN3
）
port of PCB of the AS1 and B1 before screw up the plates, then screw
up the cover plates back to the AS1 and B1 respectively (14kgf.cm
(torque) is recommended.
Note: The wiring methods between B1 No.3 to B1 No.2, B1 No. 2 to
B1 No. 1 are the same as the wiring procedures mentioned above in
NO. Configuration
AS1
(DIP)
Secondary
(DIP) NO.1
Secondary
(DIP) NO.2
Secondary
(DIP)NO.3
1 1*AS1 Only
2 1*AS1 & 1*B1
3 1*AS1 & 2*B1
4 1*AS1 & 3*B1