SAJ AS1-3KS-5.1, Руководство пользователя

Страница: 24 / 82

- 23 -
g. sites where the freezing point is reached, like garages, carports
or other places;
h. sites with humidity and condensation is above 85%;
i. places with plenty of salt;
j. flooded areas;
k. within 600mm of any hot water unit, air conditioning unit o any
other appliance associated with the pre-assembled integrated
battery energy storage system
3.3 Installation Procedure for AS1
Notice: If any B1 connected to the AS1, please refer to Chapter
3.4 first.
If ONLY installing the AS1 without any B1 connection, please go
forward to install the AS1 with instructions in this section below:
Before installation, please make sure that the wall has sufficient
strength to fix the screws and bear the weight of AS1.
Step 1: Pre-check the installation distance of the AS1 to other items;
Step 2: Positioning the Mounting bracket of the AS1 to the wall;
Mark the proper positions of mounting bracket and drill holes on
those positions (8mm in diameter, 50mm in depth) by using the
mounting bracket as a template, and then use a rubber hammer to