Saipa tiba, Руководство пользователя

Страница: 144 / 193

144
1- Remove the radiator cap by
turning it counter-clockwise.
2- Loosen the drain screw of the
radiator to evacuate the coolant
into a suitable pot.
3- While the drain screw is open
let water flow into the coolant
system.
4- After completely evacuating
the coolant system, tighten the
drain screw.
Add the required amount of
water and ethylene glycol
mixture to protect the system
from erosion and icing.
In the cold weather terrain use
the specified amount of anti-
freeze with ethylene glycol base
according to the manufacturer
instructions.
5- While the radiator cap is
open, start the engine and let it
run in the idle condition. If it is
required, add the coolant gently.
6- Now, wait for the engine to
reach its normal temperature.
Press the accelerator two or
three times and add the coolant
as required. Be careful not to be
burned.
7- Tighten the radiator cap and
inspect all the fittings if there is
any leakage.
8- Check the coolant level inside
the coolant reservoir again.
After several days driving check
the coolant system and add
coolant if required.
7
OWM125
Engine cooling system