Saipa tiba, Руководство пользователя

Страница: 140 / 193

140
Engine oil and filter
Changing engine oil and filter
The time intervals of the engine
oil and air filter change, should
be according to the scheduled
maintenance of the vehicle
explained in the current chapter.
1- Start the engine for several
minutes and then turn it off. Open
the engine oil fill cap.
2- By removing the oil fill cap and
opening the drain screw, drain
the oil into a suitable pot.
3- Open the oil filter using the
special tool.
4- Clean with a piece of clean
cloth the assembling location of
oil filter.
5- Soak the new O-ring in the
engine oil.
6- Tighten the drain screw after
completely draining the oil.
7- Install the oil filter using the
special tool.
8- Fill the new oil into the engine
until its level reaches at 'F'. Be
careful do not add oil more than
the specified limit.
9- Tighten the oil fill cap carefully.
10- Start the engine and check if
there is any oil leakage around
the O-ring of oil filter carefully.
11- Check the oil level and if it is
required, fill the oil until it reaches
at F level.
Caution
Both the engine and its oil are
hot, be cautious do not injure
yourself.
Note
Be careful the O-ring of old oil
filter to be removed. Otherwise
it may cause the oil leakage and
engine damage.
Oil Capacity
3.4 liters when replacing the oil
filter
3.1 liters without replacing the
filter
- Be careful about the oil to have
the proper specified quality.
Attention
- Although the oil filters may be
identical in appearance, their
internal design can be different.
These kinds of filters cannot be
used.
To protect engine from damage,
use only the specified filter (consult
an authorized SAIPA dealer).
- Follow the instruction. If you do
not install the oil filter properly, the
oil will leak and this will damage
the engine.
7