VISION-LITE® / VISION-LITE II®
PROCESSING GUIDELINES
MAY 2022
7
REFLECTION
TRANSMISSION
Key:
1. Illumination source
2. Observer position
3. Coated glass sample
•
Monolithic glass / laminated glass
VISION-LITE® is a class A coated glass product (as per EN 1096-1 definition). The antireflective coating
must always be positioned on face 1 of the glazing and for maximizing antireflective effect it must be
also present on face 2 of the pane.
This coated glass can be laminated taking care to always place the coating outside of the laminate. Use
of the coating against the PVB is not allowed.
Possible configurations of use:
Important:
As any coated glass, VISION-LITE® glazing must come from one production campaign only
on the same building project.
1.5.1. Position of the coating
1.5. POSITION OF THE COATING AND IDENTIFICATION OF THE COATED FACE
(Semi-) VISION-LITE
(Semi-) VISION-LITE II
Figure 1:
Schematics of examination procedures for coated glass (as per EN 1096-1)
