BarbLock® Tabletop Pneumatic Assembly Tool: Operations Manual
www.biopharm.saint-gobain.com
15
FLS-5278C-CLWR-Rev 01
20.0 Disassembly
Disconnect the air supply before performing any work on the tool. Lay the tool flat on the left side (see image 19 be-
low). Use a Phillips screwdriver to remove the 8 screws that are visible in the right side Case. Lift the right side Case
off the tool, along with its screws. Figure 19 shows the appearance of the tool after removal of the right side Case.
Do not insert any hard or sharp tools or other objects into the interior spaces of the BarbLock® Assembly Tool. Doing
so could damage internal components and cause the tool to malfunction.
Figure 19: Inside of the tool after removal of the right side Case and screws
Figure 20: A close up of view of the grease fitting on end of Carriage
