26
8.2 Viewing the High and Low Alarms
To view the current alarm settings, press the
ALARM
key to enter the
alarm mode. HI AL 1 will be displayed in the date area. At the same
time Alarm 1 time and HI alarm parameters of indoor
temperature/humidity, outdoor temperature/humidity, rain rate, AT, feels
like, wind gust, wind average, absolute pressure, UV index, Sunlight,
Sensor(CH1) temperature/humidity and dew point are displayed. Press
SET/MODE
key to view Alarm 2 time and HI alarm parameters of indoor
dew point, 24h rainfall, outdoor dew point, relative pressure and
Sensor(CH1) heat index.
Press
ALARM
key again to view the LOW alarms along with the alarm
clock time the same way HI alarms.
Press the
SNOOZE
key at any time to return to the normal mode.
8.3 Setting the Alarms
Press
ALARM
key to enter the alarm mode.
Press and hold the
SET/MODE
key for three seconds. The first alarm
parameter will begin flashing (alarm hour).
To save the alarm setting and proceed to the next alarm parameter,
Press (do not hold) the
SET/MODE
key.
To adjust the alarm parameter, press the
[+]
or
[-]
key to increase or
decrease the alarm settings, or press and hold the
[+]
or
[-]
key for
three seconds to increase or decrease the alarm settings rapidly.
Press the
ALARM
key to turn on (the alarm icon will appear ) and off
the alarm.
Press the
SNOOZE
key once at any time to return to the normal mode.
After 30 seconds of inactivity, the alarm mode will time out and return to
normal mode.
The following is a list of the individual alarm parameters that are set (in
order):
