22
11.
Wind Speed Units of Measure (default: m/s)
. Press the
SET(MODE)
key again to change the wind speed units of measure .
Press the [+] key or [
-
] key to toggle the wind speed units between
m/s, km/h, mph, knots or bft.
12. Rainfall Units of Measure (default: mm).
Press the
SET(MODE)
key again to change the Rainfall units of measure. Press[+] key or [
-
]
key to toggle the rainfall units between mm and inch.
13.
Barometric Pressure Display Units(default: hPa)
. Press the
SET(MODE)
key again to change the pressure units of measure.
Press the [+] key or [
-
] key to toggle the pressure units between
mmhg, inHg or hPa.
14.
Pressure Threshold Setting (default level 2).
Press the
SET(MODE)
key again to change the pressure threshold. Press the
[+] key or [
-
] key to change pressure threshold 2 mbar/hour to 4
mbar/hour.(For detailed information of this part please refer to 15.5)
15.
Weather Icons Setting (default: partly cloudy).
Press the
SET(MODE)
key again to change the initial weather icon. Press the
[+] key or [
-
] key to select the initial weather icon of Sunny, Cloudy,
Partly Cloudy or Rainy. (For detailed information of this part please
refer to 15.1 and 15.2)
16.
Sunlight Display Units(default: W/
㎡
)
. Press the
SET(MODE)
key
again to change the sunlight units of measure. Press the [+] key or
[
-
] key to toggle the sunlight units between ,
W/
㎡
,
fc
or lux.
17.
Location division.(default: Northern Hemisphere)
.Press the
SET(MODE) key again to change the location division. Press the [+]
key or [-] key to toggle the sunlight units Northern Hemisphere
(NOR)or Southern Hemisphere(SOU). (refer to 5.0 Final Installation
of Integrated outdoor transmitter)
7.3 Chanel Selection
Press the
C
button to switch the display between remote
thermo-hygrometer sensors 1 through 8, and scroll mode
. In scroll
mode, all of the detected thermo-hygrometer sensors will be displayed
in five second intervals.
7.4 Sensor Search Mode
If a sensor loses communication, dashes (--.-) will be displayed. If a
specific channel is lost, press the
CH/+
button to display that channel
prior to entering the search mode.