21
7.2 Set (Program) Mode
While in Normal Mode, press
and hold
the
SET(MODE)
key for at least
three seconds to enter the Set Mode. The first setting will begin flashing.
You can press the
SET(MODE)
key again to skip any step, as defined
below.
Note:
In the Set mode, press the [+] key or [
-
] key to change or
scroll the value. Hold the [+] key or [
-
] key for three seconds to
increase/decrease rapidly.
Note:
To exit the Set mode at any time, press the
SNOOZE
button
of the display console.
1. Time SYNC(default: ON).
Press the SET key again to set the
network time sync. Press the [+] key or [-] key to switch between
SYNC time ON and SYNC time OFF of measure.
2.
12/24 Hour Format (default: 24h):
.Press the
SET(MODE)
key
again to adjust the 12/24 hour format setting (FMT). Press the [+]
key or [
-
] key to change between 12 hour and 24 hour format.
3.
Change Hour.
press the
SET(MODE)
key again to set the hour.
Press the [+] key or
[-]
key to adjust the hour up or down. Note the
PM icon is present during afternoon hours.
4.
Change Minute.
Press the
SET(MODE)
key again to set the minute.
Press the [+] key or [
-
] key to adjust the minute up or down.
5. Date Format (default: MM-DD): Press
the
SET(MODE)
key again
to enter the day/month format mode. Press the [+] key to switch
between MM-DD-YY, DD-MM-YY.
6.
Change Month.
Press the
SET(MODE)
key again to set the
calendar month. Press the [+] key or [
-
] key to adjust the calendar
month.
7.
Change Day.
Press the
SET(MODE)
key again to set the calendar
day. Press the [+] key or [
-
] key to adjust the calendar day.
8.
Change Year. Press
the
SET(MODE)
key again to set the calendar
year. Press the [+] key or [
-
] key to adjust the calendar year.
9.
Max/Min Clearing (default: ON)
. Press the
SET(MODE)
key again
to set the max/min clearing mode (CLR). The Max/Min can be
programmed to clear daily (at midnight) or manually. Press the [+]
key or [
-
] key to switch between “Clears 24h” and Clears Manually.
10.
Temperature Units of Measure (default:
°C
):
. Press the
SET(MODE)
key again to change the temperature units of measure
(the
UNITSET
icon will be displayed). Press the [+] key or [
-
] key to
switch between °F and °C units of measure.
