11 |
Sailrite.com
D
D
20
21
Installing Foot Treadle
Locate the foot treadle and its accompanying
large bolts, small bolts and washers.
The foot treadle is typically installed to the right
side of the treadle mount bar, but it can be set to
the user’s preference anywhere on the bar.
Determine the desired location of the treadle
and flip the table onto its back side (
Figure 20
).
Locate the two end pivots (
D
). Very loosely bolt
the end pivots to the treadle mount bar in the
desired location. Then install the foot treadle by
placing the pins on the end pivots into the holes
on the side of the treadle (
Figure 21
). The side
of the treadle with the bolt holes for the
L-bracket (page 12,
E
) should be facing towards
the back of the table.
Once the treadle is in place, tighten the bolts.
Test the treadle to be sure it moves freely once
the bolts are tightened.
