11
12
13
14
Check Motor Rotation
The machine’s motor shaft should rotate counterclockwise when viewed from the motor
shaft end. Plug in the motor, switch the power on, and press down on the foot treadle to
confirm operation now.
If motor rotation is not counterclockwise, please refer to “Changing Motor Rotation” in the
Workhorse
®
Installation Instructions.
Machine Installation
Push the machine Support Pin (
A
) into the hole
in the tabletop nearest the carriage bolts holding
the motor (
11
).
Insert the tapered end of the knee lift post
connector (
B
) into the raised hole in the bottom
of the oil tray (
C
) (
12
).
Find the magnet for the oil tray (
D
) and place it
in the bottom of the oil tray (
12
).
Take the rubber pads (
E
) off of the chrome
hinges (
F
) and place them into their respective
tabletop cavities (
G
). Insert the two chrome
hinges into the two holes located on the back
side of the sewing machine (
H
).
With help, lift and lower the sewing machine into
the tabletop so that the chrome hinges fit into
the rubber pads (
13
).
Note: Do not cut away the string on the bottom
of the machine; it is an oil wick.
A
B
C
D
H
G
E
F
5 |
Sailrite.com
Fabricator
®
Assembly Instructions
| 6
Standard Fabricator
®
Assembly
