SAIC MOTOR MG3 2011, Руководство пользователя

Страница: 142 / 184

Emergency Information
Turn off the ignition switch and all electrical equipments
of the two vehicles, and comply with the following
instructions:
1 Connect the two batteries' positive (+) terminals with
the red booster cable. Connect the battery negative
terminal of power supply vehicle (A) with a good
earthed point of vehicle in need of power (B) (such as
the engine support or other surface with no paint of
the vehicle in need of power) with the black booster
cable, with a distance to battery at least 0.5m.
2 Check if the cable touches the working parts of the
two engines, and then start the power supply vehicle
and let it run idly for several minutes.
3 Start the vehicle in need of power, and let it run idly
for more than two minutes after the engine is started.
4 Shut the engine of power supply vehicle.
5 Remove the booster cables. The remove procedures
are opposite to the connection procedures.
IMPORTANT
It is forbidden to start any electrical equipment of the
vehicle which has been started before removing the
booster cables.
130