background image

22

CE Approval:    

 

   2797/22

Heat Input: 

 

 

   13kW (main burners)

Side Burner Heat Input:     3kW

Burner:    

 

 

   3 Burner

 

Injector Size:    

 

   Main burner 1.0mm, side burner 0.83mm

Gas/Pressure:   

 

   Butane-28mbar/Propane-37mbar

Maximum Gas   

 

   1154 grams per hour at maximum setting

Consumption:   

        

Gas Category:   

 

   I3+

Total Heat Input: 

 

   13kW (main burners) + 3kW (side burner)

 

 

 

 

 

    = 16kW

Specifications are subject to change without prior notice.

This barbecue is manufactured by: 

Global Headquarters 

Universal Innovations, Kilcoole Industrial Estate,

Kilcoole, Co. Wicklow, Ireland.

Page 19

Food Cooking Information

Please read and follow this advice when cooking on your barbecue.

• 

ALWAYS

 wash your hands before or after handling uncooked meat and before eating.

• 

ALWAYS

 keep raw meat away from cooked meat and other foods.

• Before cooking, ensure barbecue grill surfaces and tools are clean and free of old food residue.

• 

DO NOT

 use the same utensils to handle cooked and uncooked foods.

• Ensure all meat is cooked thoroughly before eating.

• 

CAUTION 

- eating raw or under cooked meat can cause food poisoning

(e.g bacteria strains such as E.coli)

• To reduce the risk of under cooked meat, cut open to ensure it is cooked all the way through internally.

• 

CAUTION

 - if meat has been cooked sufficiently, the meat juices should be clear in colour and there

should be no traces of pink/red juice or meat colouring.

• Pre-cooking of larger meat or joints is recommended before finally cooking on your barbecue.

• After cooking on your barbecue, always clean the grill cooking surfaces and utensils.

Technical Data

Содержание S375





















Отзывы: