SECURITY
All the materials used were selected according to the UNI-CEI-EN specifications.
Thus these instruments, which received the CE marking, have reached a satisfactory degree of intrinsic safety, as long as the
users are qualified operators with knowledge of the rules for use and maintenance as exposed in this Manual, and safety devices
supplied are never misused.
There is even a ground point.
Acoustic pressure level is under 70dB.
I.P.D. ( Individual Protection Devices) - Minimum Req.'s
To avoid accidents, please follow these minimum requirements:
- Use protective gloves heat & steam-resistant.
- Use face-protecting mask to avoid possible scald injurie
Precautions
Ensure that:
- the unit is installed in a stable, horizontal position.
- the internal ventilation openings are not blocked.
- the instrument has a minimum space of 100 mm from the wall for a correct installation
- the working space has a temperature range from 5° to 40°C and the humidity range has to be between 30% and 80%.
- the instrument has to be connect to an circuit with ground (system) and with conformity to law.
- the instrument is correctly connect to a plug near to the unit, accessible and with identification sign.
- need to introduce item in the correct way inside the instrument to avoid fall down of them.
Avoid conditions of dust excess.
EC CONFORMITY
Units 8107.108-110-112, conform to EC directives directives:
EMC 2014/30/CE
,
LVD 2014/35/CE
,
MD 2006/42/CE
, the following harmonized
standards are in use EN 60204-1, EN 61000-6-1, EN 61000-6-3, EN 292.
A weighted sound pressure <70dB (A)
A weighted sound power < 85dB (A)
Rear sign:
WARRANTY
This unit is guaranteed against all defects due to faulty materials and workmanship, within 12 months from the date of purchase.
A use not conforming to what specified might be dangerous to the safety of the operator and may damage the unit.
In such circumstances the manufacturer is relieved of any liability and the warranty itself will decay.
Protecting the environment
Separate collection.This product must not be disposed of with normal household waste.
Should you find one day that your product needs replacement,or if it is of no further use to you,do not dispose of it
with household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of electrical products from the
household,at municipal waste sites or by the retailer when you purchase a new product.
REPAIR
Repairs have not been attempted by anyone other than authorized repair distributors.
Do not try to repair the unit by yourself.
ATTENTION:
Dangerous voltage is present inside the unit.
Page 2
Sahara DRY, 07/.2021
S.N. 232217
SAHARA 80
230Vac/50Hz 1200W
Fuse: 6,3A
