Sagitter Tracer Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 18

Sagitter Tracer Скачать руководство пользователя страница 2

1

BEFORE CONNECTING AND USING THE PROJECTOR, IT IS IMPORTANT TO READ CAREFULLY ALL THE
INSTRUCTIONS IN THIS MANUAL.

QUALIFIED PERSONNEL ONLY, IN COMPLIANCE WITH ALL THE SECURITY LAWS, CAN DO THE
INSTALLATION, THE MAINTENANCE AND THE UTILISATION OF THIS PROJECTOR.

BEFORE CONNECTING THE PROJECTOR, MAKE SURE THAT THE FREQUENCY AND THE VOLTAGE
VALUES ARE SUITABLE AS SPECIFIED ON THE PROJECTOR.

FOR ANY DOUBT, CONTACT YOUR SUPPLIER OR SEND AN E-MAIL TO:

[email protected]

INDEX

GENERAL DESCRIPTION OF PROJECTOR --------------------------------------------------- page

2

START-UP PROCEDURES --------------------------------------------------------------------------  page 5
CONTROL UNIT  ----------------------------------------------------------------------------------------  page 6
WHAT’S INSIDE -----------------------------------------------------------------------------------------  page 7
DMX CHANNEL ASSIGNMENT --------------------------------------------------------------------  page 8
CONTROL SYSTEMS  ---------------------------------------------------------------------------------  page 10
OPTICAL SYSTEM  ------------------------------------------------------------------------------------  page 13
MAINTENAINCE ---------------------------------------------------------------------------------------- page 14
TROUBLESHOOTING  --------------------------------------------------------------------------------  page 16
SPARE PARTS ----------------------------------------------------------------------------------------- page

17

WARRANTY --------------------------------------------------------------------------------------------- page

17

«
1
2
3
4
...
»

Содержание Tracer



















Отзывы:

Нет отзывов