10
CONTROL SYSTEMS
CONTROL FROM TRACER CONTROL UNIT
In this mode, the projector is controlled directly from the on-board TRACER control unit.
To better understand the working, we suggest to read carefully this paragraph and, if possible, to operate step by
step directly on the TRACER console or to refer to the TRACER console drawing.
COLOUR SECTION
Colours are controlled from here.
Quick- select keys can be used to project the corresponding colour.
Two-colour beams are projected when two adjacent keys are pressed simultaneously.
When the Rainbow/Fixed Colours key is pressed, the projector will do the rainbow effect. Rotation speed is
controlled by the colour section slider when the Rainbow LED is switched on. This function may be switched off by
pressing the Rainbow/Fixed Colours key again or any of the quick-select COLOUR keys.
FILTER CORRECTION SECTION
Temperature correction filters and frost filter are controlled from here.
The colour temperature correction filter keys is used to set primary colours (5600°K), warm colours (3200°K CTO)
or cold colours (6500°K CTB). The FROST filter key is used to obtain soft beam using.
DIMMER /SHUTTER SECTION
This section contains the controls for light beam characteristics: INTENSITY, my means of the DIMMER, and
STROBE EFFECT, using the variable speed SHUTTER.
Note that the action of the slider for this section depends on the position of the Dimmer/Strobe selector. When the
Dimmer LED is on, the slider adjusts the intensity of the beam. When the Strobe LED is on, the slider controls the
strobe effect speed.
The two Blackout keys on both sides of the DIMMER / SHUTTER SECTION open or close the shutter
instantaneously. This function has priority over the other keys in this section, when the black-out function is active
the LED over the two blackout keys flashes.
When the blackout LED is flashing, just press any one of the two blackout keys and the projector will return to
either dimmer or strobe status (depending on the position of the dimmer/strobe selector).