manualshive.com logo in svg

SagiCofim HTE 400, Руководство по сборке, установке и обслуживанию

Поделиться
Скачать
SagiCofim HTE 400 Скачать руководство пользователя страница 34

SE_20200507_HTE 400_M

34

HT400 Rectangular fi re damper - UNI  EN 1366-2 Certifi ed  -  UNI  EN 13501-3  Classifi ed

TO RESTORE DAMPER OPERATION FOLLOW THE INSTRUCTIONS OUTLINED HERE IN REVERSE ORDER.

NB: 

THE ACTUATOR’S CROSSHEAD CLAMPING SCREW AT THE PIN HEAD MUST BE TIGHTENED TILL IT REACHES THE SCREW SUPPORT 

       ON THE BLACK INDICATOR ARROW, WITHOUT ANY PRESSING.

1

4.3    

Dampers with Belimo electric actuator 

   mod. BF/BAE thermal fuse

4.3.1 

Procedure for replacing dampers with height < 250 mm

1. Check the condition of 

the damper 

 

DISCONNECT 

the actua-

tor and wait for the damp-
er to close completely.

2. 

Loosen the anti-rotation screw using 
a size 8 spanner and the actuator’s 
crosshead clamping screw at the con-
trol pin.

3. 

Slip the actuator off the control pin, 
taking care with the 12 

x 

12 board 

adapter

 (1)

4. 

Dismantle the thermal fuse by unscrewing the two cross-
head screws.

5. 

Remove the thermal fuse and replace either the fuse alone 
or the entire actuator/thermal fuse arrangement.

Содержание HTE 400

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды