background image

 

66 

3410330_GB

 

PRECAUTIONS IN THE CASE OF LONG PERIODS OF INACTIVITY

 

 
Observe the following precautions during long periods of inactivity: 

  Disconnect the power supply; 

  Remove all food from the cabinet and/or drawers and clean the 

interior and accessories; 

  Clean the cabinet vigorously and all stainless steel surfaces 

using a cloth slightly soaked in Vaseline oil, so as to spread a 
protective film; 

  Leave the door open to facilitate air circulation to prevent the 

formation of unpleasant odours; 

  Cover the compressor unit with a nylon cloth to protect it from 

dust; 

  Air the premises out periodically. 

 
After maintenance work is completed, 
it must be ensured that the machine is 
able to work safely, and in particular 
that the protective and safety devices 
are fully functional. 

 

 

 

 

TROUBLESHOOTING 

 
 
 

ANOMALY TABLES 

 
The equipment always displays a warning message or an alarm in the event of an 
anomaly. Type on the warning icon to view the status of the outputs/inputs to display the 
alarm. The warning remains active until the problem is resolved. 
 

Warning icon 

 
Follow the instructions provided by the equipment and contact Customer Service if 
required, remembering to: 

  Disconnect the equipment from the electrical system; 

  Deactivate the protection switch upstream of the equipment; 

The controller records 40 alarm events. The events are recorded in the list in the Settings 
menu (Alarm History). 

 

 

OFF

Содержание 51H Series

















































































Отзывы: