Sagi 51H Series, Инструкция по использованию и установке

Страница: 64 / 80

64
3410330_GB
NEEDLE PROBE CLEANING
IMPORTANT
Take particular care uses the needle probe, bearing in mind
that it is a sharp object that must be handled with particular
care when cleaning.
We recommend cleaning the needle probe periodically to ensure its optimal
operation. The probe should be cleaned manually using lukewarm water and mild soap, then
rinsed with clean water and disinfectant solution.
CAUTION
Never clean the probe with boiling water.
TRAY HOLDERS AND INNER STRUCTURE
The tray holders and inner structure are removable and dishwasher-safe.
Proceed as shown in the figure below to remove them.
DRAIN PLUG
During cooking cycles, remove the cap to drain the water on the internal bottom of the
chamber.
To clean the drain plug, remove it as shown in the figure.
Clean it with lukewarm water and mild soap, then rinse and dry thoroughly.
OTHER SURFACES
Clean plastic and metal parts only with non-aggressive cleaning agents.
Stop using these products immediately if you detect any visual or tactile
changes to the surfaces and rinse with water (e.g. discolouration
plastic/fusion/other, or rust marks/scratches on metal). Dry carefully after
rinsing.