Sagi 51H Series, Инструкция по использованию и установке

Страница: 16 / 80

16
3410330_GB
List of rates shown on the rating plate:
1)
Model
2)
Manufacturer’s name and address
3)
CE mark
4)
Year of make
5)
Serial number
6)
Power insulation class
7)
Electrical device casing protection
rating
A)
Input voltage
B)
Electric current intensity
C)
Frequency
D)
Rated power
E)
Total lamp power
F)
Fuse current
G)
Coolant type
H)
Coolant q.ty
L)
Temperature grade
M)
Max hydraulic supply pressure
N)
Cabinet temperature
P)
Expanding fluid
R)
WEEE Symbol
S)
Heater presence
T)
Heater power
W)
Heating element power
Z)
Minimum pressure
AA)
Water consumption
TESTING
Our equipment is designed and verified through laboratory tests to ensure guaranteed
performance and efficiency.
The equipment is delivered to be ready for use.
Passing the tests (visual test, electrical test, functional test) is guaranteed by means of the
specific annexes.
Should the appliance have been transported horizontally instead of a vertical position DO
NOT START THE
APPLIANCE IMMEDIATELY. WAIT FOR AT LEAST
24 HOURS BEFORE OPERATING.
The manufacturer declines any responsibility and any warranty obligation if damage
occurs to the equipment imputable to transportation in a horizontal position.
Respect the machine's operating conditions: outside temperatures must be between 15°C
and 40°C.
Switch on the unit and wait 30 minutes before use if the outside temperature is “low”.
Check absorption
Carry out at least one complete blast-chilling cycle in order to verify correct operation
Make sure that the room has proper air exchange.
(tab 6)
Model
Air quantity
[m
3
/h]
51L-51H 1100
101L-101S 3500