SAGEMCOM RCI88-1000, Руководство пользователя

Страница: 172 / 189

80
10.Troubleshooting
Symptom Action
The remote control is not working.
• Press the EXIT key to switch to receiver mode.
• Point the remote control at the receiver.
• Check the battery life and check the batteries are inserted
properly.
The receiver displays a black screen or an
error message. • Search for programs (see Automatic Channel Scan ,
page 39 ).
The picture is frozen / unclear.
• Check all the connections, check the antenna and search
for programs again (see
Automatic Channel Scan ,
page 39 ).
The receiver cannot find any channels.
• Check the cable connection.
• Check the cable signal reception (see TV Signal , page 60 ).
• Search for programs (see Automatic Channel Scan ,
page 39 ).
• Contact your cable installer/operator for more information
on your cable installation and reception.
The TV set does not detect the receiver
when it leaves standby mode.
• Check that your TV set is connected to the TV SCART
socket (see
Connection to a Standard-Definition
television using a SCART lead , page 14 ).
• If necessary, select the SCART input directly on your TV
set.
There is no sound in HOME CINEMA
mode on some channels.
• Check that the receiver is connected to a HOME CINEMA
amplifier through the optical SPDIF connection (see
Connection to a home cinema amplifier , page 16 ).
Black and white video on VCR output
(during VCR/DVD recording).
• Check that the signal type chosen for VCR Scart output is
compatible with your VCR (see
Picture Settings ,
page 43 ).
A black screen (no video) appears at the
end of a recording.
• When a recording ends on a program which does not
transmit any interpretable recording video signal (Teletext
feature, fixed image, switch from unscrambled to
scrambled transmission, broadcast with video placeholder,
etc.), the video recording stops but the time counter
continues until the end of the scheduled recording time.
For any other problem.
• Perform a default factory reset (see Factory Reset ,
page 40 ).