SAGEMCOM RCI88-1000, Руководство пользователя

Страница: 132 / 189

40
7.1.6 Delete Additional Channels
Use this feature to delete unwanted channels installed after you performed a manual channel search (see
Search for Additional Channels , page 39 ).
1. Press the MENÜ key.
2. Select SETTINGS with or , and press OK .
3. Select SYSTEM UPDATE with or , and press OK or the right key.
4. Select DELETE ADDITIONAL CHANNELS with or , and press OK or the right key.
5. Select the channels to delete by highlighting them and press OK : selected channels appear with a
check mark.
6. To unselect a channel, press OK . To scroll up or down the list, use the P
+
or P
-
key.
7. Once all the channels to delete are selected, press ZURÜCK or the left key: a confirmation
message appears.
8. Press OK to confirm the deletion of the selected channels.
7.1.7 Factory Reset
This menu lets you restore the factory settings of the receiver.
1. Press the MENÜ key.
2. Select SETTINGS with or , and press OK .
3. Select SYSTEM UPDATE with or , and press OK
or the right key.
4. Select FACTORY RESET with or , and press OK .
5. A warning message appears.
• To cancel the operation, select NO with or and
press OK , or press ZURÜCK .
• To confirm the reset, select YES with or , and
press OK .
6. Once the default settings are restored, the receiver installation screen is displayed. You can then
reconfigure your receiver (see
First installation , page 18 ).
Important
If you reset the default settings, you lose the favorite channels, settings and
bookings you made. This operation does not erase the recordings saved on the
receiver hard disk.