SAGEMCOM RCI88-1000, Руководство пользователя

Страница: 129 / 189

37
ENG
7. Settings menus
To access and move around the menus and change various settings, just use the left , right , up and
down keys to highlight your selections, use OK to confirm, and ZURÜCK to leave a
screen.
These keys are available both on the remote control and on the front panel of the receiver.
You can also enter the number assigned to a menu to directly select it.
For an overview of the Settings tree and the default values, refer to Overview of the Settings menu ,
page 63 .
7.1 System Update
The SYSTEM UPDATE menu lets you configure the software update feature, search for channels,
monitor the system and reset the receiver to its default factory settings.
To return to the previous screen and save your changes, use the ZURÜCK or the left key.
To exit the menu screen, press the MENÜ or EXIT key.
7.1.1 Software Update Mode
By default, your receiver automatically checks if new software is available and asks you if you want to
perform the download.
You can modify the software update mode to be:
• Automatic : The receiver automatically downloads new software when the receiver is in standby
mode.
• Manual : Whenever new software is available, the receiver asks you if you want to perform the
download now, postpone it until you put the receiver in standby mode or refuse the download.
To modify this setting:
1. Press the MENÜ key.
2. Select SETTINGS with or , and press OK .
3. Select SYSTEM UPDATE with or , and press OK
or the right key.
4. Select SOFTWARE UPDATE MODE with or , and
press OK or the right key.
5. Select the desired mode, AUTOMATIC or MANUAL with
or .
6. Press OK to confirm the new setting.
For more details on the Software update process, refer to Software Update , page 68 .