Sagem WA 3050, Руководство пользователя

Страница: 122 / 310

122
connection, your network administrator will need to
set up a RAS account for you.
§
Use an Ethernet card and a network connector to
connect to the network
.
Note
The phone must be turned on but idle (no voice
calls or dial-up session in progress) to connect to your
network using a modem. You will be unable to make
or receive calls during the time that your device is
connected.
To create a modem connection to a network
1. Get the following information from your network
administrator: dial-up access telephone number, user
name, password, domain name, and TCP/IP settings.
2. Tap , Settings . On the Connections tab, tap
Modem .
3. Tap New connection .
4. Tap "Enter a name for the connection", activate the
keyboard and enter a name for the new connection you
create, such as “Company Connection.”
5. Select your modem type in the Select a modem list.
Note You should not need to change any settings in
Advanced . Most servers now use a server-assigned
address. If the server you are connecting to does not
use a server-assigned address, tap
Advanced then the
TCP/IP tab and enter the address. When you are
finished, tap OK then Next .
Avoid to modify "Baud rate" field.
6. Enter the access phone number, and tap Nex t.
7. Select other desired options, and tap Finish .