Sagem myC5-2, Техническая документация инструкция

Страница: 99 / 111

Proc Sheet 2 01
myC5-2
REMOVING/ REPLACING THE DATA/ AUDIO/
CHARGE CONNECTOR
1/3
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005 Page 5-44
Notice: The handsets requiring the replacement of system connectors cannot be repaired under Sagem
warranty.
The eventual deterioration of the board due to a bad replacement of the connector fall under the Repair
Centre responsibility.
- Replacement procedure of DATA/ AUDIO/ CHARGE connector
1-Disassemble the handset Proc 1 09
2-Replace the defective connector (see below) Ref: 28 700 046-0
3 - Replace the electronic board in the mobile phone Proc 1 09
4 -To test the replacement of the connector, it is necessary to:
a) Connect the mobile phone on SMT maintenance software (test Sheet 01)
b) Make real calls with a pedestrian handsfree Kit Reference : 25-130 173-9
c) Test the charge of mobile phone
5 - Standard test after repair