Proc Sheet 1 08
myC5-2
REMOVING / REPLACING THE EQUIPPED
DISPLAY
1/2
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005
Page 5-26
4.51 The equipped display include the display, the PCB, the loudspeaker and the vibrating device.
4.52 Tools :
- Soldering iron
- Cross shaped screwdriver
- Cruciform screwdriver
4.53 Preliminary operation
1. Remove the battery pack (
Proc sheet 0 01
).
2. Remove the front flip cover (
Proc sheet 1 05
).
4.54 Removal procedure :
1. Remove the audio gasket from the flip lower cover (3)
2. Release the vibrating device and the loudspeaker from the flip lower cover (3)
3. Release the equipped display (1) from the flip lower cover (3) by separating the four stop pins (2)
4. Remove the PCB flex connector (4) on the equipped display (1)
5. Remove the equipped display (1)
4.55 Placement procedure :
1. Connect the PCB flex (4) into the new equipped display (1)
2. Position the equipped display (1) in the front flip cover (1) respecting the pins (2)
3. Position the vibrating device and the loudspeaker on the flip lower cover (3)
4. Position the audio gasket in its housing.
4.56 Further operations :
1. Replace the front flip cover (
Proc sheet 1 05
).
2. Replace the battery pack (
Proc sheet 0 01
).
Содержание myC5-2
Страница 16: ...Technical Site Documentation myC5 2 Ref SCT U38 SSC DTS 0024 Index B February 15 2005 Page 2 7...
Страница 23: ...Technical Site Documentation myC5 2 Ref SCT U38 SSC DTS 0024 Index B February 15 2005 Page 3 14...
Страница 29: ...Technical Site Documentation myC5 2 Ref SCT U38 SSC DTS 0024 Index B February 15 2005 Page 3 20 SYMPTOM SHEETS...
Страница 41: ...Technical Site Documentation myC5 2 Ref SCT U38 SSC DTS 0024 Index B February 15 2005 Page 4 32 TEST SHEET...
