Sagem myC5-2, Техническая документация инструкция

Страница: 40 / 111

Technical Site Documentation myC5-2
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005 Page 4-31
4.3 INSTALLING ON A WORKSTATION
4.3.1 Minimum required configuration
The minimum configuration of the workstation is :
4. Processor 1Ghz,
5. 128 Mbytes of RAM,
6. Windows 2000, Windows XP,
7. 2.1 Gbytes hard disk (1 Gbytes available),
8. 1 parallel port and 2 serials port.
9. Network card, sound card.
10. 1 internet access,
4.3.2 Installing the ARC downloading kit
The ARC downloading kit interfaces the SMT software with the phone to be repaired.
11. Connect the 9-pin SUB-D connector to the PC serial port (COM1).
12. Connect the power supply module to the mains power outlet.
13. Connect the phone to be repaired to the system connector.
4.3.3 SMT functions
The SMT maintenance software can:
14. Download new software if needed
15. Configure default values and checks them.
16. Unblocked the " PHONE CODE "
17. Delete the customer directory and SMS
18. Print identification labels.
19. Make a electronic board exchange
20. Adjust the display contrast
21. Read the Site Technical Documentation ( manual of repair)
22. Select a test sequence
The procedures for using these functions are described in TEST Sheet 01 .