Sagem MorphoAccess 200E, Руководство по установке, Страница: 7 / 112

2 3
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER.
MUST BE DISPOSED OF PROPERLY.
Safety instructions
ATTENTION
IL Y A DANGER D'EXPLOSION S'IL Y A REMPLACEMENT
INCORRECT DE LA BATTERIE.
REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU
MÊME TYPE OU D'UN TYPE ÉQUIVALENT RECOMMANDÉ
PAR LE CONSTRUCTEUR.
ELIMINER DE FAÇON APPROPRIÉE.
WARNING: Failure to properly seal the MorphoAccess against the mounting
surface may result in accident or injury. Due to the many types of building
materials that exist, ensuring adequate sealing against the mounting surface
is the sole responsibility of the installer. The mounting gasket provided with
the MorphoAccess is only for the convenience of the installer. For some
applications with rough mounting surfaces, a bead of silicone sealant can
be placed around the entire perimeter of the gasket before placing the
MorphoAccess against the mounting surface.
WARNING: As an additional precaution, take all steps necessary (in
accordance with the National Electric Code) to ensure that if water leaks into
the mounting surface, that no high voltage or other potentially dangerous
wiring, power sources, transformers, or electronics will become wet. This
may include installing high voltage wiring or electronics above the hole
in which MorphoAccess is mounted and waterproofing connections as
needed. Providing for safety outside the MorphoAccess packaging is the
sole responsibility of the installer.