Sagem MF9300, Руководство по эксплуатации

Страница: 104 / 116

102
KEY OPERATOR PROGRAMS
ROTATION SENDING SETTING
This setting allows you to select whether or not a vertically
placed A4 original is rotated to a horizontal orientation
(A4R), an A5R original is rotated to A5, or an 8-1/2" x 11"
original is rotated to 8-1/2" x 11"R before transmission.
The image is rotated clockwise. (A4R originals, A5
originals, and 8-1/2" x 11"R originals are not rotated.)
In Taiwan, select whether or not an A4 original is rotated
to A4R, a B5R original is rotated to B5, an A5R original is
rotated to A5, or an 8-1/2" x 11" original is rotated to 8-1/2"
x 11"R before transmission.
(However, A4R, B5, A5, and 8-1/2" x 11" R originals
cannot be rotated.)
Rotation settings can be established separately for different
document sizes. To disable a rotation setting, touch the
checkbox of the appropriate setting to remove the checkmark.
CALL TIMER AT MEMORY SENDING
When sending a fax by automatic transmission
("Storing transmission jobs (memory transmission)"
(p.16)), this setting lets you select the amount of time
that the machine waits before breaking the connection
when the other machine does not respond to your
machine's calling tone. If the other machine does not
respond within this set time, your machine will
automatically break the connection.
Time selections are [30 sec.], [45 sec.], and [60 sec.].
(In Hong Kong, select [30 sec] or [45 sec].)
RECALL IN CASE OF LINE BUSY
When sending a document, this setting is used to
select whether your machine will automatically
re-attempt the call when the other machine fails to
answer or the line is busy. To disable automatic
recalling, select the [NO RECALL] checkbox.
Settings that can be selected vary by region. See the
table below.
RECALL IN CASE OF
COMMUNICATION ERROR
When sending a document, this setting is used to select
whether your machine will automatically re-attempt the
call if the transmission fails due to a line error.
Settings that can be selected vary by region. See the
table below.
QUICK ON LINE SENDING
When this program is enabled and memory
transmission is selected, the machine will call the
receiving machine while the original pages are being
scanned and begin transmission from pages that have
finished scanning.
When the program is disabled, transmission will not
begin until all pages have been scanned (with the
exception of manual transmission and direct
transmission). ("Quick On-line" (p.15))
Region Settings
Australia,
New Zealand,
Malaysia, India,
Singapore
Recall times: 1 to 9 times / no recall
(factory default setting: 2 times)
Recall interval: 1 to 15 min.
(factory default setting: 3 min.)
Taiwan Recall times: 1 to 14 times / no recall
(factory default setting: 2 times)
Recall interval: 4 to 15 min.
(factory default setting: 4 min.)
Hong Kong Recall times: 1 to 3 times / no recall
(factory default setting: 2 times)
Recall interval: 1 to 15 min.
(factory default setting: 3 min.)
Saudi Arabia,
UAE, Bahrain,
Oman, Qatar
Recall times: 1 to 10 times / no recall
(factory default setting: 2 times)
Recall interval: 1 to 15 min.
(factory default setting: 3 min.)
KEY OPERATOR PROGRAMS
ROTATION SENDING SETTING
ORIGINAL
SET SENDING
DIRECTION ORIGINAL
SET SENDING
DIRECTION
A4 A4R
A5R A5
8 1 /
2
x11 8 1 /
2
x11R
OK
• Even if this setting is enabled, your machine will
not re-attempt the call when a document is sent
by manual transmission and direct transmission.
• In Australia and New Zealand, the machine will
function according to the "RECALL IN CASE OF
COMMUNICATION ERROR" setting if the
receiving machine does not answer.
Region Settings
Australia,
New Zealand
Recall times: One recall attempt or
no recall attempts
(factory default setting: 1 times.)
Recall interval: 0 to 15 min.
(factory default setting: 1 min.)
Taiwan Recall times: 1 to 14 times / no recall
(factory default setting: 2 times.)
Recall interval: 4 to 15 min.
(factory default setting: 4 min.)
Malaysia,
India
Recall times: 1 to 9 times / no recall
(factory default setting: 2 times.)
Recall interval: 1 to 15 min.
(factory default setting: 1 min.)
Singapore Recall times: 1 to 9 times / no recall
(factory default setting: 2 times.)
Recall interval: 0 to 15 min.
(factory default setting: 1 min.)
Hong Kong Recall times: 0 to 3 times / no recall
(factory default setting: 2 times.)
Recall interval: 1 to 15 min.
(factory default setting: 1 min.)
Saudi Arabia,
UAE, Bahrain,
Oman, Qatar
Recall times: 0 to 5 times / no recall
(factory default setting: 1 times.)
Recall interval: 1 to 15 min.
(factory default setting: 1 min.)
Even if one attempt is selected, your machine will
not re-attempt the call when a document is sent
by manual transmission and direct transmission.
Note
Note