MF 5461 / MF 5481
- 27 -
6 - Parameters/Setup
1
Select
FIXED
and confirm with
OK
.
2
Enter the reduction value (between 70 and 100)
and confirm with
OK.
3
To exit this menu, press
.
Technical Parameters
As delivered your machine is preset by default. However,
you may adjust it to meet your requirements by resetting
the technical parameters.
To set the technical parameters:
29 - SETUP / TECHNICALS
1
Select the desired parameter and confirm with
OK
.
2
With the keys
or , modify the parameter
settings by following the table below and press
OK
.
Parameter Signification
1 - Scanning mode
Default value of the scan mode
resolution for the documents to
be transmitted.
2 - TX header
If this parameter is on, your
header will appear on all
documents sent to your
subscribers with your name,
number, date and number of
pages.
Warning:
If you send a fax
from the document loader, the
transmission header will not
appear on the document your
correspondent receives.
3 - TX speed
Transmission speed for
outgoing documents.
For a quality telephone line
(compatible, no echo),
communications occur at
maximum speed.
However, it may be necessary
to restrict the transmission
speed for some calls.
4 - Echo protect
If this parameter is on, the on-
line echo will be reduced during
long distance calls.
6 - EPT mode
For some long distance calls
(satellite), the on-line echo may
disturb the call.
7 - COM. display
Choice between transmission
speed displayed or number of
the page in progress.
8 - Eco energy
Choosing the printer standby
delay: the printer will switch to
standby after a delay (in
minutes) of NON-operation or
during the period of time of
your choice.
10 - RX header
If this parameter is on, all
documents received by your fax
will include the subscriber’s
header with his name, number
(if available) fax print date and
the page number.
11 - RX speed
Transmission speed for
incoming documents.
For a quality telephone line
(compatible, no echo),
communications occur at
maximum speed.
However, it may be necessary
to restrict the transmission
speed for some calls.
12 - Rings
Number of rings to
automatically start your
machine.
13 - Discard size
The
Discard Size
parameter only
defines the printing of received
faxes . The number of lines of a
document can be too high for the
printing paper format. This
parameter defines the threshold
beyond which the extra lines are
printed on a second page. Bellow
this threshold, extras lines are
deleted.
If you choose
With,
the threshold
is set on 3 centimeters.
If you choose
Without,
the
threshold is set on 1 centimeter.
20 - E.C.M.
This parameter helps correct the
calls made on disturbed
telephone lines. It is used when
the lines are weak or too noisy.
Transmission times may be
longer.
Parameter Signification
