Sagem F@st 1704, Справочное руководство

Страница: 85 / 202

5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-49
Sagem Communications SAS document. Reproduction and disclosure prohibited
• Check the Select a Service box, then select the service of your choice from the scroll down
list, for example "SNMP".
The External Port Start , External Port End , Internal Port Start , Internal Port End and
Protocol fields (transport protocol associated with this service) are automatically filled in
the table.
Note
You may complete the table by adding other ports associated with a protocol.
or
•
Check the Custom Service box, enter the name of the server you want to connect to, then:
•
Complete the ID Host of your computer's IP address (this is attributed by your router's
DHCP server).
• Fill in the External Port Start , External Port End , Internal Port Start ,
Internal Port End and Protocol fields.
A few rules for entering values:
• When you want to select a single port, the start port ( External Port Start or Internal Port
Start ) and the end port ( External Port End or Internal Port End ) must be identical.
•
When you want to select a range of ports, the start port number must be lower than the end
port number.
•
You must always start entering with the External Port Start and External Port End ports.
• When you allocate a number to an External Port Start , the same number is automatically
allocated to the Internal Port Start and identically for External Port End .
The following diagram contains an example:
The "Delta Force 2" service is available on your computer via the external ports 3568 and 3569
(WAN side) and via the internal ports 3568 and 3569 (LAN side).