5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-37
Sagem Communications SAS
document. Reproduction and disclosure prohibited
Field
Action
Default value
PPP retry on
authentication error
Check the box, PPP can be retried again and
again while authentication fails
Checked
PPP retry period
(seconds)
Enter if required a retry period. This value (in
seconds) is by default set to 15 seconds. You
can set another value from 3 to 65535.
15
PPP MTU (Bytes)
Enter an MTU (
M
aximum
T
ransfer
U
nit) value.
This value (in bytes) is between 46 and 1500.
Note:
The MTU specifies the maximum size
of the data used (IP packets) expressed
as a number of bytes.
1500
Use Static IPv4 Address
Check the box to use the static IPv4 address.
Not checked
IPv4 Address:
13
Enter the static IPv4 address.
0.0.0.0
Enable PPP Debug mode
Check the box to use the PPP Debug mode.
In the event of connection failure, this option will
enable you to trace a possible problem in the
SYSLOG file.
Not checked
Enable IGMP Multicast
Proxy
Check the box to activate the IGMP function.
Not checked
•
Click on the
Next
button to continue configuring the remote network (WAN) in PPPoA
mode.
•
Select a preferred wan interface as the system default gateway.
•
Click on the
Next
button to continue configuring the remote network (WAN) in PPPoA
mode.
13
This field only appears when the "Use Static IPv4 Address" field is activated (box checked).
Содержание F@st 1704
Страница 1: ...SAGEM F stTM 1704 Reference Manual Edition of October 2009 253 272 861 A ...
Страница 2: ......
Страница 201: ......